•Orders under $250.00 add $50.00
•Orders Over $1000.00 Save 10%
•Orders Over $2500.00 Save 15%
•Additional Colors per location $2.00
•Class U                                                                         •Blank Hats List price less 15%

• Pad printed logos are permanent and will not peel, crack, or fade like a decal or sticker (or get dirt and grime built up around peeled edges).
  
• Hanson pre-treats pad printed and striped caps to draw out any oils and gases that may be present in the plastic. This must be done immediately before logos are applied to be effective. This ensures that the print adheres and that no "bubbling" will occur later in the life of the product.
  
• Our printing technicians are professional and ensure a quality, consistent look on all Hard Hats.
  
• Hanson performs all work in house; thus reducing cost, labor, and time.
  
• We do not have any set-up charges, artwork charges, or proofing charges for decorated hard hats and caps.

Molded from high density polyethylene for maximum protection. 6-point nylon suspension. Easy "Quick-Slide" sizing adjusts suspension from head sizes 6 1/2 - 8. Optional Secure-Fit ratchet features an easy turn knob that allows adjusting for a perfect fit.

Made in America and meets ANSI Z89.1-2003, Type 1, Class C, E & G requirements.

Fibre-Metal® E-2 Series.
• 8 point suspension
• Adjustable sizing and height for the most comfortable fit
• Smooth crown design

Print sizes are
front 2 1/2" w x 1 1/4" h,
side 2 7/8" w x 1" h,
back 2 7/8" w x 1 1/4" h
for two color logo. Print sizes are reduced for more then 2 colors.

Fibre-Metal®'s technologically advanced thermoplastic hats and caps are the quality leader in head protection. They combine exceptional protective performance with extraordinary comfort to reduce risk and improve productivity.

4-point injection-molded, polyethylene suspension adjusts from head sizes 6 1/2 - 8. Features a short peak and trim profile. Functional rain trough.

Made in America and meets ANSI Z98.1-2003, Type 1, Class C, E and G requirements.

Ideal for protecting head from lacerations, minor bumps and bruises in areas that do not require certified safety helmets. Molded from high density polyethylene. 4-point injection-molded suspension. Adjusts from head sizes 6 1/2 - 7 3/4

CAUTION: Bump Caps do NOT meet ANSI Z89.1-2003 or CSA Z94.1, and are not to be worn for protection from impact of falling or glancing objects.

Molded from high density polyethylene. Features short peak and trim profile. Optional Secure-Fit ratchet features an easy turn knob. Adjusts from head sizes 6 1/2 - 8.

Meets ANSI Z89.1 - 2003, Type 1, Class C, E and G requirements.

V-Gard® Protective Caps and Hats from MSA consist of a polyethylene shell and suspension system working together as a protection system.

V-Gard® headwear features advanced styling in either cap or hat styles. Size 6 1/2 - 8.

V-Gard® Caps and Hats meet or exceed the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1 2003, Class E and G.

V-Gard® Caps and Hats are not specifically designed to protect against lateral blows from the front, side or rear.

The lightweight construction makes the helmet comfortable to wear while still providing additional lateral protection.

• Adjusts to fit sizes 6 1/2 to 8
• Wide nape strap for secure fit
• Universal slots accommodate hearing, welding and face shield accessories
• Comfortable six-point nylon suspension with Coolmax™ terrycloth sweatband

Sentry III™ w/Ratchet
Sentry III™ w/Ratchet Suspension
• Lightweight 13 1/2 oz.
• Adjusts to fit sizes 6 1/2 to 8
• Ratchet holds cap in place for secure fit
• Universal slots accommodate hearing, welding and face shield accessories
• Comfortable six-point nylon suspension

*All caps supplied with Coolmax™ terrycloth sweatbands to wick away user's perspiration for comfort. Coolmax™ is a registered trademark of DuPont.

Meet or exceed all applicable requirements for ANSI Z89.1-1997 for a type I helmet.

NFL Properties, the NFL and its member clubs make no express or implied claims with respect to the effectiveness and safety of these products and have not manufactured or endorsed these products in any way.
Protect yourself while declaring your Team allegiance.

College Hard Hats

Arizona, Arkansas, ASU,Auburn, BYU, Cincinnati, Clemson, Colorado Rams, Duke, Florida, Fresno State, FSU, Georgia, Georgia Tech, Iowa, Iowa State, Kansas, Kansas State, Kentucky, Louisville, LSU, Miami, Michigan, Mihigan State, Minnesota, Missouri, North Carolina, State, Nebraska, Ohio State, Oklahoma, Oklahoma State, Penn State, Pittsburgh, Purdue, South Carolina, Tennessee, Texas, Texas A&M, Texas Tech, Utah, Virgina, West Virgina, Wisconsin

Nascar Hard Hats

   Dale Earnhardt

   Dale Earnhardt Jr.

   Jeff Gordon

   Tony Stewart

VCB100-06   COWBOY HARD HAT W/6 Pt Ratchet Suspension: Black

VCB100-11  COWBOY HARD HAT W/6 Pt Ratchet Suspension: Grey

VCB100-15  COWBOY HARD HAT W/6 Pt Ratchet Suspension: Tan

VCB100-00  COWBOY HARD HAT W/6 Pt Ratchet Suspension: White

Dual American Flag:
Waving American flag on each side

American Stars & Stripes:
Red & white stripes on front, white stars on blue field over rest of cap.

Patriotic Canadian:
Red maple leaf design

Patriotic Mexican:
Eagle seal on cap front, Mexican flag on each side.

"United We Stand"
V-Gard with flag and "United We Stand" on the front

$21.95 each

Please allow 3-4 weeks for shipping on this item.